Fender DRRI

Someone gutted this reissue amp and built a hand-wired 6L6 deluxe reverb circuit inside the chassis.  The amp was filled with cold solder joints and missing/incorrect connections.  

I moved the components to their "original" location, re-did most of the wiring, and replaced most of the components, putting the circuit back to stock with a few tweaks to the output stage and power supply.  I also installed a larger power transformer so the owner could safely run the 6L6s with a tube rectifier.  An upgraded output transformers had already been installed.

© 2017 Hunt Amplification, LLC      623-236-9096